Installing vinyl siding over wood siding is a great way to change the look of your home. However, there are some precautions that you need to take. The first step is to make sure that your siding will be able to withstand the elements. You will need to install a moisture barrier. This can be done with a polyethylene sheet. The next step involves sealing the seams with vapor-barrier tape. The last step is to attach the moisture barrier to the furring strips, which will hold the siding in its place.
Once you've inspected the condition of your siding, you'll need to adjust some of the doors and windows in your house. The new thickness of your walls might require the expansion of the frames for casement windows. You will need to remove trim from windows that are set in slightly.
Mold, rot, and decay should all be removed from wood siding. You'll also need to replace it with fresh boards. Contractors can repair damaged siding. If it's not structural, you can leave it there.
Before you start the process, it's important to determine how much wood sheathing you have attached to your home. The ideal is to remove at minimum a couple inches of this wood. You can use a measuring tape to estimate the length and width of the sheathing. Place the siding panels on the surface flat enough that they do not overlap. It is a good idea also to cover any imperfections in the walls with rigid foam.
Before you can replace your existing wood siding with vinyl siding, it is necessary to remove all trim and windows. Also, make sure your house is level. This makes it easier for siding panels to be aligned at corners.
Before you can start installing vinyl siding panels, you need to make a starter strips. This is typically a vertical strip made of lumber and should be placed about one inch above the siding. It is common to use a 16-inch spacing between the strips. You can attach a starter strip to your wall by placing nails in the center of the fastening slots. Drive the nails into the slot and leave a 1/4 inch gap at each end.
Vinyl siding can be installed over wood siding. However, it is important to not damage the sheathing. You should consult a contractor with experience installing vinyl siding if you are unsure. It is important to prepare for possible problems such as outdoor light fixtures or gutters.
FAQ
Can I do the whole renovation myself?
If you are able to do it yourself, why not pay someone else?
No matter how much DIY you love, there will be times when it is impossible to do it yourself. There may be too many variables involved for you to control.
For example, if you live in an old home, you might find that the wiring is outdated and you would need to hire a qualified electrician to make sure that your electrical system is safe and reliable.
Also, you should consider that some structural damage may not be possible during renovations.
You may not have the proper tools to complete the job. For example, if your goal is to install a new sink in your kitchen, you will need to purchase a plumber’s snake, which is designed to clear blocked pipes.
You will also need a licensed plumber to work on your plumbing project.
You must be confident in your abilities before you attempt such a difficult task.
Ask for assistance from family and friends who have completed similar tasks before if you are uncertain.
They can advise you on the steps you should take and where to look for further information.
How long does it usually take to renovate your home?
It depends on how large the project is, and how long you spend on it each day. On average, homeowners spend between three and six hours per week working on their project.
Is it better to remodel an older house than build a brand new one?
Two options are available to those who want to build a home. You can buy a pre-built house. This type home is already constructed and ready for you to move in. You can also build your own home. This option will require you to hire a builder in order to design and build your dream house.
Cost of building a home is determined by how much time you spend planning and designing it. Custom homes may take more work as you'll need to complete most of it yourself. However, you have more control over what materials you use and where they are placed. It may be easier to find a contractor who is skilled in building custom homes.
A new home will usually be more expensive than a renovated home. This is because you will have to pay more for the land as well as any improvements that you make to it. Additionally, permits and inspections will be required. On average, the price difference between a new and remodeled home is $10,000-$20,000.
What should I do if I want to hire an architect/builder?
You might find it easier to hire someone to do your home renovations. You can hire an architect to help you design the perfect home.
How can I find a reliable contractor?
Ask family and friends to recommend contractors. Look online reviews as well. It is important to confirm that the contractor that you choose has worked in the same area as you. Get references from other people and review them.
Statistics
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
- According to the National Association of the Remodeling Industry's 2019 remodeling impact report , realtors estimate that homeowners can recover 59% of the cost of a complete kitchen renovation if they sell their home. (bhg.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
External Links
How To
How much should I spend on restoring my house?
The cost of renovating a home depends on how many rooms it is, what kind of renovations, where it is located, and whether the work will be done by professionals or you. Depending on the scope and size of the project, the average renovation cost is between $10,000 and $50,000.
You'll probably get less than the market value of your home if you don’t include the cost of repairs, upgrades and other improvements. If you do not put in enough effort to make your home attractive before selling, you might lose money. You can increase the sale price of your home if you spend enough time and effort to improve its appearance.
These factors can help you make a decision about which projects to take on first.
-
Your budget. Start small if you have a tight budget. For example, you can tackle one room at a time, such as painting walls or replacing flooring. For major renovations, you can either hire a contractor who specializes on kitchen remodeling or save money.
-
Your priorities. Do you want to improve the overall condition of your home or just fix specific problems? You should not limit your efforts to one problem. Even minor problems can quickly add up. If your roof leaks when it rains, it might be necessary to have it replaced sooner than you think.
-
Your timeline. You might prioritize projects that will not affect your home's resale price if you are considering buying another property. If you're considering buying a property next year and want hardwood floors installed or new bathroom fixtures, then you won't want them to be done right away. To make these upgrades, it might be a good idea to wait until you leave your home.
-
Your skills. If you do not possess the skills required to accomplish a particular project, hire someone else. If you are unable to carpenter custom cabinets, hiring a cabinet maker may be an option.