There are many siding options available for your home. Cement board house siding is one of the most durable siding options. Cement board siding can withstand extreme temperatures, rain and wind. The siding is also pest-free. It's an excellent choice to make for your Fort Worth home.
There are two types main cement boards. The first one is made of Portland cement. The second type is made with a mixture of cement and plant fibres. These fibers give the board its durability and flexibility. The fibers undergo pulverization in water and are then mixed with a variety if additives. A cement fiber board may contain as much as eight percent cellulose and up to forty to sixty percent cement. It also contains twenty to thirty per cent cellulose fillers.
If you plan on installing a cement board over a wood or steel framing, you may need to use screws. To ensure strength, screws should have a ring shank. It is important that screws are flush to the surface. They can weaken the board's hold if they are too deep.
It is important to ventilate your cement board construction before installing it. You will have mold problems if you don't have enough airflow. Installing the board in a location where it will be exposed to moisture is a good idea. You'll need to add a waterproofing layer to the board. A vapor barrier is also recommended to prevent water from entering the area. These materials are easily found at your local hardware retailer.
Before you start installing cement boards, measure the space. To account for heat expansion, leave at least one quarter inch between each board. To get the right measurements, it is a good idea using a drywall Tsquare. It is necessary to place the board over a thin coating of adhesive mortar.
After you have installed the cement board you will need to seal it and use a silicone-based caulk to stop leakage. The board can be attached to the wall using a drywall screws. It is recommended to pre-drill all fasteners. If you don't own a drywall screw you can use a Ring Shank Nail.
Installing your board over brick or tile will require you to use a backer. It will help prevent the tiles breaking. Water-resistant compounds are also necessary to keep tiles from moving. This is especially important if you plan to expose the tiles to moisture. If the space has water spray or showers you'll need to waterproof it. If you're installing the cement board on a floor, you can also use a vapor barrier. For attaching the board to a floor, you can use a screwdriver and a ring shank nail.
For cutting the cement board you will need a saw and grinder. You will also need a carbide-tipped knife. You want to make sure the board is cut in a well-ventilated place. This will avoid the skunky scent that comes with cutting cement board.
FAQ
How often should my furnace filter be changed?
This depends on how often your family will use their home heating system. It is worth changing your filter more often if you intend to spend a lot of time outside during winter months. You may be able wait longer between filters changes if you don't often leave the house.
A typical furnace filter lasts approximately three months. This means you should change your furnace filters once every three months.
You can also check the manufacturer's recommendations for when to change your filter. While some manufacturers recommend replacing your filter once per heating season, others recommend waiting until there is visible dirt buildup.
Do I need permits to renovate my house?
Permits are required before you can start any home improvement project. In most cases, you will need a building permit and a plumbing permit. You may also need a zoning permit depending on the type of construction you are undertaking.
What should I do first in a house renovation?
Clean out your home and get rid of all clutter. Next, remove moldy spots, replace damaged walls, fix leaky pipes, and paint the whole interior. Finally, you need to clean off the exterior surfaces and apply fresh paint.
Statistics
- According to the National Association of the Remodeling Industry's 2019 remodeling impact report , realtors estimate that homeowners can recover 59% of the cost of a complete kitchen renovation if they sell their home. (bhg.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- Design-builders may ask for a down payment of up to 25% or 33% of the job cost, says the NARI. (kiplinger.com)
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
External Links
How To
How do you plan a complete home remodel?
Planning a whole-house remodel requires planning and research. Before you start your project, here are some things to keep in mind. The first thing you need to decide is what kind of home improvement you want to make. There are many categories that you could choose from: kitchen, bathroom or bedroom; living room or dining room. Once you have decided which category you wish to work in, you will need to determine how much money you have to spend on your project. If you have never worked on homes, it is best to budget at most $5,000 per room. If you have some experience, then you might be able to get away with less than this amount.
After you have determined how much money you have available, you can decide how big of a project you would like to undertake. If your budget only allows for a small renovation of your kitchen, you will be unable to paint the walls, replace the flooring or install countertops. On the other hand, if you have enough money for a full kitchen renovation, you can probably handle just about anything.
Next, find a contractor who is skilled in the type and scope of work you wish to undertake. You will be able to get great results and avoid a lot more headaches down in the future. After finding a good contractor, you should start gathering materials and supplies. You might need to make everything from scratch depending upon the size of your project. However, it is possible to find everything you need in a variety of shops that sell premade items.
After you've gathered all the supplies you need, it's time to begin making plans. Begin by sketching out a rough plan of where furniture and appliances will be placed. Next, design the layout of your rooms. You should leave enough space for electrical outlets and plumbing. You should also place the most frequently used areas closest to the front door, so visitors have easy access. Final touches to your design include choosing the right colors and finishes. In order to avoid spending too much money, stick to neutral tones and simple designs.
Once you have completed your plan, it is time to begin building. It's important that you check the codes in your area before you start construction. Some cities require permits. Other cities allow homeowners without permits. To begin construction you will first need to take down all walls and floors. To protect your flooring, you will lay plywood sheets. Next, you will nail or screw together pieces wood to create the frame for your cabinets. Lastly, you'll attach doors and windows to the frame.
There will be some finishing touches after you are done. Covering exposed pipes and wires is one example. To do this, you'll use plastic sheeting and tape. You'll also want to hang pictures and mirrors. You should always keep your work area clean.
You'll have a functional home that looks amazing and is cost-effective if you follow these steps. Now that you have a basic understanding of how to plan a house remodel, it's time to get started.